Unleash your inner DIY and successfully repair your leaks, drips, holes and cracks
Liquid Rubber has a range of products that enable you to unleash your inner DIY and successfully repair your leaks, drips, holes and cracks. Our products are cost effective, easy to use and proven both in NZ and around the globe. In our DIY section you can find everything you should need to know about our products and how to apply them. However, if you have any further questions please feel free to contact us here.
Our Products
Our Liquid Rubber Waterproof Sealant is our main waterproofing product. It is a paint-like substance that can be easily applied to most common surfaces to create a reliable waterproof layer and protective coating. Our Waterproof Sealant is only available in black. Henry Ford would be proud!
We have two Topcoat products. We recommend one of these are always applied over the top of our Waterproof Sealant to improve durability and increase longevity. Our Textured Coating contains a textured substance in the product to provide a gritted, non-slip finish. Our Smooth Coating provides a smooth, semi gloss finish. These Topcoats are designed to provide protection against New Zealand’s harsh UV rays and are available in a range of colours.
Waterproofing Tape
We have two products for sealing and waterproofing gaps, seams, tears or joins. Our Seam Tape is a heavy duty, industrial strength adhesive tape that can be applied directly onto the desired area.
Our GEO Fabric is a special material that needs to be placed over top of (wet) Liquid Rubber Waterproof Sealant, then coated again with another layer of Waterproof Sealant to provide a waterproof and protective membrane.
You can purchase Liquid Rubber products from this website. We are also stocked in over 30 Mitre 10’s nationwide. We also hire out specialised Liquid Rubber spray applicators to save you time and hassle.
Typical applications for Liquid Rubber Products:
- Roofing – repair of new and existing roof constructions
- Foundation walls
- Masonry and facades
- Gutters and downpipes
- Garages, parking deck and basement floors
- Fencing
- Retaining walls
- Steps, walkways, paths and curbs
- Sealing of wet areas in bathrooms and showers
- Decks, balconies, verandas, patios and porches
- Decks and walkways around pools
- Skylights, vents
- Ponds and decorative water features
- ICF’s
- RV’s
- Flashings
- Sealing of cable runs in roofing and walls
Liquid Rubber products can be applied to:
- Concrete
- Wood
- Brick, masonary
- Most metals – iron, steel, galvanised steel, aluminium
- Butynol
- Shingles
- Tiles
- Difficult roof materials such as EPDM, TPO, most PVC, SBS, APP, BURs, propylene, polystyrene, fiberglass and OSB
Liquid Rubber products can not be applied to:
Silicon, certain smooth or shiny surfaces eg plastic piping and some varnishes or oil based paints. If you are unsure, please contact us to discuss your requirements.
Please contact us if your desired application or surface is not on the list above and we can advise you on the suitability of our products.